Iaosb.Com

Ireland’s Number One Website For Building A House

Building Stages Building  Materials Household Appliances Landscape & Gardening Information Video's
Legal & Finance Design & Planning Schedule & Cost Health & Safety Renewable Energy Water Supply Heating & Insulation
Home Waste Management Problems & Solutions Tools & Machinery Contact Us Advertise

Irish Association Of Self Builders                                         The Representative Body for Self Builders of Ireland

Directory

1- Finding A Site 2- Ground Condition 3- Designing Your Home 4- Planning Permission 5- Finding Contractors 6- Site Clearance 7- Foundations
8- Base Structure 9- Drains & Pipes 10- DPC & Radon 11- Ground Floor 12- Wall Structure 13- Cills & Lintels 14- Second Floor
15- Roof Structure 16- Chasing 17- Doors & Windows 18- External Wall Finishes 19- First Fixes 20- Interior Joinery 21- Interior Plastering
22- Second Fixes 23- Snag List 24- Decorating 25- Moving Water Connection ESB Connection Eircom Connection

Ground Condition


Types of soil; Before you buy a site or start building on an existing site, you need to find out the type of the soil you are going to be dealing with and what effect it would have, if any on the foundation of your house. This is not something that you can do yourself unless you are a professional land surveyor, so get a full report done with the right people.


There is a lot of variation on load bearing capability of different soils, what this means is that when you place your foundation and the house on the soil it should be able to take the weight. If the soil’s bearing capacity is too low, you will need to have special foundation designed by a qualified architect or an engineer. This could be a raft, piles or other options. An average two storey house has a bearing capacity of approximately 75 KN/m2.


The following is a guide to the load bearing capability of different soils:


Rock has a very good load bearing, but the foundation must be carried down to unweathered rock and stand on even bearing.


Types of subsoil

Bearing Capacity KN/m2

Limestone

4000

Slates

3000

Hard Shale’s

2000

Sand & Gravel usually has an acceptable bearing capacity, however a full site test must be done to insure that the bearing level is not effected by things like the water level. In cases of loose sand or loose gravel and loose silty/clayey sand, there might be a need for a raft foundation.


Types of subsoil

Bearing Capacity KN/m2

Compact Sand

Greater than 600

Compact Gravel

Greater than 300

Loose Gravel

Less than 200

Loose Sand

Less than 100

Loose silty/clayey sand

Less than 100

Clays & Silty Clays are generally very bad soil conditions for foundations and house constructions as all clays and silts are susceptible to long term settlement. It is therefore highly possible that you need a special foundation like a raft instead of a ordinary strip.


Types of subsoil

Bearing Capacity KN/m2

Hard/Stiff Clay

300 - 600

Stiff Sand / Clay

150 - 300

Firm Sand / Clay

75 - 150

Soft Clay/Silt/Sand

75

Very soft Clay/Silt/Sand

Less than 75

Peat is very bad news when it comes to foundations and advice should be taken from an expert in the field to the required procedure before any construction work is done. Peat could be very soft or firm and before any attempt is made on the foundation, all peat and organic soil should be removed up to a reliable bearing level below.


Please note: The above information is only for guidance purposes and for any type of soil, an expert in the field should be approached for advice.


Copyright © 2003 - 2017 Irish Association of Self Builders


Share on Facebook Share on Twitter Share via e-mail Print Share on Google Bookmarks

Self Build Direct is the leading insurance policy offering protection to individuals building or extending their homes.

Our cover leads the market and has been developed after assisting 1,000's of self builders over the last 20 years.

Arachas Corporate Brokers Limited trading as Arachas is regulated by the Central Bank of Ireland